Maximize Margins in Light Naphtha Isomerization Units
Revamp your Deisohexanizer into a dividing wall column to boost food-grade hexane output and strengthen isomerization unit economics.
Background of light naphtha (C5-C6) Isomerization unit:
Maximize margins in light naphtha isomerization units by looking beyond octane upgrading alone. The increasing demand for more efficient and low emission fuels on account of new stringent environmental policies and growing environmental awareness lead to the refineries looking for options on the enhancement of RON of the gasoline product. This made the light naphtha isomerization process gain immense importance across the globe and it became an intrinsic part of almost all refineries. The isomerization process is not only capable of upgrading the octane number of naphtha fractions specially the C5’s and C6’s but also simultaneously reduces the benzene content of naphtha by saturating the benzene and its precursors. Isomerization process is simple and cost effective for octane enhancement and makes light naphtha an ideal blending component in refinery gasoline pool. Talking on the structural level the straight-chain paraffins get converted into their branched-chain counterparts known as isomers which improve the RON of the isomerate and this has made this process gain popularity in the petrochemical facilities. Technology companies offer various options of isomerization processes, be it once through or recycle. Benefits of RON of the final product clubbed with capex and opex involved in revamps govern the decision of refineries in taking up the isomerization unit a must part of their facility. A few examples of this transformation of compounds into its isomeric forms through the process of isomerization which have the same chemical composition but different structure and different physical and chemical properties, are depicted in figure 1.
Figure 1: Reactions in an Isomerization Process
As the isomerization process itself is mildly exothermic, low temperature favors the reaction in forward direction, hence highly active catalyst are employed. To avoid the formation of olefins in low-temperature process, the feed to the isomerization plant is premixed with hydrogen. Processes are capable of upgrading low octane C5/C6 streams to products with octane ranging from 80 RON up to 93 RON. It has been observed that once through processes give product in range of 80-84 RON while recycle processes with deisopentanizer and deisohexanizer columns can give products with RON as high as 93.
Process flow scheme in a light naphtha Isomerization unit with recycle
Figure 2: Block flow diagram of a typical Isomerization Unit
The compositions of the light isomerate and the heavy isomerate stream can be seen at a glance from the above process flow sheet. The light isomerate is mainly composed of four components i.e. Isopentane, N-pentane, 2 methyl butane and 3 methyl butane. The focus on improving the RON of this stream has made technology companies invest time and money for further improvements in processes and catalysts. The recycle stream which is send back to the reactor is mainly a mixture of 2 methyl pentanes (2MP) , 3 methyl pentanes (3MP) and N-hexane.
Lesser the quantities of 2MP & 3MP in recycle stream, there is a rise in the tendency of the equilibrium to shift in a direction so as to lower values of 2 Methyl Butane(2MB) & 3 Methyl Butane (3MB) in the product stream, which are critical components that contribute to RON of total isomerate. Thus the recycle stream should have requisite amount of 2MP and 3MP in order to obtain desired product specification. But this eventually leads to the third component of the recycle stream i.e. N-hexane to build up in the recycle loop which effects the throughput of the Isom reactor and it becomes a bottleneck when it comes to capacity augmentation.
C6 products from light naphtha Isomerization unit
The above bottleneck lead to recognizing the novel idea of drawing N-hexane out of the recycle loop and using it to make more value added products. N-hexane drawn from the loop can be converted to marketable products like the food / polymer / pharma grade hexane, iso-hexane & special boiling point solvents.
Figure 3: A closer look at Deisohexanizer column component split in an Isomerization Unit
This is an added benefit for facilities specially where Isom unit is bottleneck. Not only does these marketable products bring in additional revenue to the facility but as the recycle to the Isom reactor decreases more feed can be pushed through the reactor. Figure: 3 help in understanding the compositions of feed and product stream DIH column. It also helps to get an idea of what are the set targets and specifications of the outlet streams when it comes to DIH column. As newer technologies with recycle offer benefits on RON, so facilities across the globe who use this technology look forward to remove the intrinsic drawbacks associated with this technology.
Why Food grade hexane (FGH) production via light naphtha Isomerization unit is more attractive than other routes:
An alternate route for production of Food Grade Hexane and SBP solvents is by selective extraction of dearomatized light naphtha fraction post hydrotreating. In this sulfolane is used as solvent so as to get FGH as the mid-cut while the top and the bottom products are mixed to get the SBP solvents. Though this technology is used widely but has few shortcomings when compared with the production of FGH post ISOM unit because:
- The latter does not require any Aromatic extraction unit (ARU) to be installed to get dearomatized Naphtha.
- When FGH is produced from Isom unit stream i.e. from the DIH column no additional column is required while the former requires a couple of columns in series.
- Also when n-hexane is produced post Isom, the stream which has the lowest RON is consumed. Hence by this revamp a valuable product like FGH is produced from a stream containing components like N -Hexane which has the lowest RON in the gasoline pool.
- Not only does the revamp to produce FGH from the DIH column brings additional revenue it also debottlenecks the Isom in terms of capacity by at least 25%.
- There is an increase in total octane barrel by the route of FGH production through ISOM.
Specifications and uses of C6 products from light naphtha Isomerization unit
Food Grade Hexane (FGH): Food grade hexane is a colorless solvent. They are primarily used in the extraction of edible oils. This calls for very high purity levels of hexane, followed by safe and careful storage. It also finds usage in a limited manner in preparation of rubber adhesives, can sealing compounds etc. Polymer Grade Hexane (PGH): Polymer Grade Hexane is a fast evaporating hydrocarbon solvent that consists essentially of hexane isomers. A concentration of approximately 40% makes n-hexane the major component in this mixture. Polymer grade hexane is used as polymerization medium and in the manufacture of catalysts. Iso-hexane: This is another compound of interest which also can be drawn from the recycle stream. It is a solvent used in industrial, professional, and consumer applications such as manufacturing process solvent, metal working, and coatings. It is not sold directly to the public for general consumer uses; however, this product may be an ingredient in consumer and commercial product applications such as cleaning agents and coatings. Special Boiling Point Spirit (SBP): Sometimes on the market demand one more product is made from the recycle stream called the Special Boiling Point Spirit 55/115. It is used in the rubber industry particularly during the process of vulcanization in tyre manufacturing or in preparation of certain rubber mixes, cements and adhesives. It is also used as thinner for varnish, paint and printing inks formulation where quick drying is required and as diluent for lacquer, enamels, high grade leather drops. View Food/Polymer Grade Hexane Product Specifications (PDF) for the complete specifications of C6 products discussed above.
Why Dividing Wall Columns (DWCs) offer better revamp options ?
Watch DWC Prime Video
Dividing Wall Columns (DWCs) have gained popularity both in grassroots and revamps in petrochemical industry. The technology works on refurbishing of conventional distillation columns, which are the most energy intensive areas of refining and chemical industries. Use of this technology has made facilities reap maximum benefits and of late many revamps are being taken up by the refineries to harness the benefits of DWC in areas which were bottleneck otherwise.
Revamps of conventional columns to DWC can reap the following benefits :
- Ideal alternative for revamp of side cut columns when high purity is required from the three product streams.
- Lower foot print as equipment count is reduced by half.
- Equipment turnaround time and other miscellaneous expenditure are reduced.
- The operational and capital expenditure are reduced by approximately 20-50%.
Dividing wall column in Deisohexanizer (DIH) vs new columns post DIH for producing FGH.
As demand of C6 products surged the refineries could foresee an additional source of revenue and galloped to take up making FGH by the conventional route or by drawing FGH from the recycle stream by installing new FGH columns post DIH column. As in our previous discussion we could conclude that obtaining FGH through the ISOM route is more attractive than the de-aromatization route . The usual way of obtaining FGH from the recycle stream is by installing two new columns post DIH column. Figure 4 shows the typical configuration of producing food grade hexane by DIH route. In this process a new FGH column is installed after the DIH column so as to divert the mid cut/recycle stream to this column. The next column in series, receives the top cut of the previous column and gives two cuts, one of which is the FGH stream and other is the recycle to the reactor. This route when compared with revamping DIH column itself using divided wall scores less as it involves capex and opex of two columns,
Figure 4: Typical Configuration for producing Hexane Products in Industry using conventional sequence of columns
It has a requirement of more plot space and also has higher operating cost in terms of steam consumption per ton of FGH produced. This way of producing FGH though brings additional revenue to the refinery but viability of the project on account of above cons pushed this revamp to take a backseat. Also the facilities who had already taken up this route of making FGH looked forward to make FGH by revamping the DIH column by using dividing wall column technology so that they could at least save on the operating cost.
For the facilities the revamp of DIH column to divided wall column can be of immense benefits. The existing DIH column can be revamped to a dividing wall column to produce four cuts i.e. the DIH can give light and heavy isomerate as top and bottom products, along with FGH and the recycle stream as other two cuts. This option is explicitly described in the figure below showing how a middle dividing wall column takes care of the overlap of the heavy isomerate and the recycle stream as it reduces the number of stages required for the desired specs in comparison to the conventional column and these spare stages are available in obtaining the fourth cut .
Figure 5: Use of DWC Technology for revamp of Deisohexanizer
This option of getting four cuts from the DIH column is not only attractive in terms of lower capex and opex but is flexible enough as the column is capable of operating in two modes i.e. the FGH Mode in which is column will produce a fourth cut i.e. Food grade Hexane and the DIH Mode in which the column operates on the a conventional mode with recycle to Isom Unit and there is no FGH Production. For producing the fourth cut the alignment of the wall inside the column is customized so as to meet the desired product specs, quantities and simultaneously targeting on minimizing the heat loads. This process advantages are enough to prompt the facilities to take up such processes for beneficial production of FGH.
Figure 6: Hexane Production in Isomerization Unit using DWC Prime Technology
- There is a balance between FGH Production and Maximization of RON
- With the drawing of FGH i.e. n-hexane from the recycle stream as the fourth cut, the recycle rate to the Isom reactor is reduced. This helps in pushing more feed through the reactor and is helpful in capacity augmentation.
Case Study
Studies have been done for a refinery in Asia and the use of this technology in production of food grade hexane shows immense benefits in terms of following analysis.
Table 1: Cost basis for economic evaluation
- Revenue increased by producing high value hexane products
- The RON of isomerate products remains unchanged.
- The isomerization unit can process an additional 8-15% of light naphtha feed without any modifications to the isomerization units
- Typical project payback is 2-10 months.
Table 2: Project Payback
Analysis on cost basis and typical payback for the unit are summarized in the table 2 stating the investments vs the total revenue post revamping a Deisohexanizer (DIH) column into a dividing wall column (DWC column) for the facility in concern with the above mentioned feed rates.
Conclusion
The refineries are forging way and looking forward to taking up the production of Food grade/pharma grade hexane through the route of using dividing wall column technology by revamping the DIH column to a four cut column. This is a promising venture as with only some modification in the existing DIH column in terms of the installation of divided wall and change limited to few trays the revamp can be done easily in 25 man in man out days which are typically available during the annual shutdown in the facility. As summarized in the table the payback is extremely attractive i.e. less than a year and with demands of C6 products rising this seems to be an attractive venture.
